Will Free-Sync Pose A Threat To G-Sync Gaming Monitors?

asus rog swift PG278Q
ASUS ROG Swift PG278Q – A juggernaut in the monitor industry.

The biggest monitor makers today are offering their G-Sync monitors for a fairly respectable price but with the Asus ROG Swift selling for $799, that’s still a high order for most average gamers. If you’re one of those gamers who’re looking for cheaper alternatives to the Asus 27″ gaming monitor, you’ll be happy to know that both Phillips and BenQ are in the market as well.

Their equivalents of the ROG Swift cost as low as $600, which is approximately 20% cheaper. It’s a great buy if you’re not too concerned about the extra polishes that the Asus gaming monitor has over these low-cost versions. For instance, the bezel that the ROG Swift has is extremely thin and putting all 3 of them together for a multi-display gaming system has never looked better. In fact, with its G-Sync capability, you’ll be hard pressed to find any screen tearing at all, even across 3 simultaneous displays.

While I wouldn’t call such a gaming monitor a must-have, it’s certainly a huge upgrade over the best non-G-Sync monitors (reviews here). After all, if you’re a serious first person shooter gamer, it is essential that you have minimal or zero display lag since it offers you a huge advantage over other players online. This is hardly achievable with the older or more conventional gaming monitors simply because V-Sync does introduce some input lag in relation to this. Sure, you could easily turn V-Sync off and set your pre-rendered frames to 0 for maximum responsiveness, but at what cost? The excessive screen tearing could also catch you off-guard as your enemies will seem to split into two parts as you struggle to determine what their real positions are.

Interestingly, 27″ monitors seem to suffer from this effect to a larger degree. Basically, if a monitor is required to display frames that are fast-moving, and more pixels have to be drawn on the screen, it can be difficult for your graphics card in your PC to catch up. G-Sync basically eliminates all of these problems and more.

amd's free-sync technology
FreeSync technology by AMD

It will be quite a feat for AMD to match up their new but similar technology that they’d called FreeSync. Currently, only their graphics card series (and even then, only the R7 and 9) are compatible with such an interface. Again, much like the G-Sync, the only port that works with this technology is the DisplayPort. Despite this lack of flexibility, I’m personally pumped up to see what the future monitor industry offers for us gamers, in the hopes that these gaming monitor prices will fall so that the average gamer like myself can afford one without having to fork out 2 months worth of our rent.

Read More

Rearing Chickens For Fun – Should You Do It Too?

chicken
A fully grown chicken.

Through rearing their own chickens, many people feel that their food items can be made as organic as is possible without getting exposed to the synthetic chemicals that industrial goods will incorporate. Although this could seem like a wonderful venture to attempt, you will inevitably be required to devote a good amount of time and energy on it. By way of example, choosing the right breed of chickens and building an ideal chicken coop will be needed. It is best to plan ahead as well as know what you need to achieve from this project. Do you find yourself planning to collect merely the eggs from your chickens or do you want them for their meat as well? It would be better still when you can keep selected chicken breeds as a way to produce top quality chicken eggs. All of these should be determined prior to starting a chicken coop and purchasing your chickens. It shouldn’t be too expensive if you follow this guide here. Mixing up several chicken breeds jointly so as to broaden your production may not be a sensible strategy because a number of chicken breeds just do not go along well at all.

Multiple other elements have to be considered as well. The overall climate of the area should be an important aspect to consider. Your chickens could become ill if this isn’t managed properly. Without the proper actions taken to treat any ailments, your entire flock may well succumb to these. A terrific word of advice for you is to keep your new chickens away from the old ones, at the least for a few days. The reason being that any illnesses or disorders might effortlessly spread from your older flock to the new or vice versa. If it were to transpire, your entire flock might be doomed which might be very costly.

Be generous in terms of constructing nesting containers for your chickens simply because this will ensure that the chicken eggs may be laid in a very comfortable way. Or else, if the eggs are strewn all over, the other chickens may well trample upon them accidentally. Predators are also an extremely prevalent problem for chicken proprietors. Making use of chicken wire as a safety measure is probably not ideal if there are strong predators in the region like dogs. Hardware cloth will be a favorable alternative option to chicken wire with regard to offering safety.

If you possess the time to do this, building a chicken coop completely from scratch could save you a ton of money. If you can get hold of a set of illustrative manuals or designs, constructing a chicken coop will certainly be a reasonably uncomplicated course of action. Even so, for all those trying to find speedy outcomes or for individuals that don’t intend on carrying this out long-term, getting a chicken coop straight off the bat will be much better.

Read More

Do People Today Still Use Vinyl Players?

vinyl record
A vinyl playing on a vintage record player.

Understanding how every turntable has different technical specs, in particular with regard to the important parts in it, may help greatly within a person’s pick of the best record player. At the minimum, an individual must understand how songs may be created from the device. To put it simply, the stylus, the needle attached to the end of the tonearm, is placed on the spinning record to produce audio. Though that might sound rather simple, the groove of each and every record is finer in comparison to a strand of hair hence the accuracy and sturdiness of the needle, the cartridge as well as the tonearm need to coincide perfectly with one another.

Even though it is theoretically feasible for a record player to cost approximately $1000, not everyone can take pleasure in the difference between the higher-end and lower-end models. A huge improvement in the quality of sound may be experienced. Within a turntable, one of the most major features is the base of the system. This foundation or “plinth” is the part which supports your device and enables it to stand. A metallic or timber plinth is okay but if possible you must have a smooth rubbery texture externally allowing vibrations dampening. This stops any interference to the music being produced from the vibrations and your music and songs will seem much clearer as a result. You’ll want a powerful as well as decent platter to place your records on. Typically, you’ll need a platter that’s as heavy as it can be so that it vibrates significantly less when it’s rotating. As you might know, all turntables may be split into 2 key categories in line with the sort of drives they’re set up with.

In the past, a belt driven record player has been typically the most popular option (see bestrecordplayerlab.com) since the motor is found further away from the platter and thus, much less vibration will be passed along to the platter as soon as the motor unit is turned on. Less vibrations fundamentally means that there’ll be a lot less disturbance with the sound generation. In a direct drive setup, the platter is going to be spun via the electric motor directly below it. As both of the systems have immediate contact with one another, vibrations and consequently interference had been unsurprising. With better dampening control, the problems of vibrations have been discarded almost fully and today, direct drives can perform equally as well as belt driven units.

Record players with belt drives will not have the capability to have its vinyl played in reverse mode, therefore eliminating a significant capability that DJs require the most. A large portion of the unnecessary frills within a turntable would have been taken off and simply the primary elements (such as the platter) will be kept for DJs to spin and produce distinctive tracks as a result. It’ll be much harder to get a new record player that features a belt drive upon it today as most development continues to be centered on producing units with a direct drive.

The tonearm of a turntable is the part that swings out from the corner of the unit and its tip is swung out across the record. A turntable’s quality depends intensely on the ultimate design of the tonearm itself. The contact between the stylus and also the record has to be delicate enough not to scuff the surface of the record. Automatic or manual functioning of the tonearm will differ according to every record player, but manual versions are definitely more well-known in turntables made especially for DJs. Semi-automatic return processes are feasible as well for some of the old devices so that the tonearm is going to be returned by itself after the music ceases playing. For manual systems, you’ll have to raise the tonearm and put it over the vinyl by yourself. Since fewer numbers of parts will be needed to construct a manually operated turntable and hence there’ll be smaller likelihood of disturbance, audiophiles tend to prefer this type of products.

Another huge facet in record players would be the cartridge being employed. As an alternative, you could potentially decide on a model that currently includes a cartridge pre-mounted in order to save the difficulties of having to install your own. An example here will be VPI Industries Traveler, whereby a fundamental but pricey unit of cartridge has been mounted onto the device. Cost-effective systems could be as much as $250-$500 whilst the higher-end products like the Audio-Technica AT-LP120 could cost approximately $900. To generate a substantial profit from us vinyl fans, a couple of the less ethical businesses would have installed a cartridge and smacked an additional premium onto the price tag. Cheaper models that perform equally well from brands like Luxman can be acquired and you could then proceed to mount a cartridge of your liking. The stylus is housed within this cartridge itself. A cartridge improvement really should be the first thing that you look at should you wish to improve the efficiency and performance of your record player.

audio technica at-lp1240
Audio Technica AT-LP 1240 is one of the most popular models right now.

Also, it is recommended that you invest in some high quality speakers to help enhance your vinyl listening experience. Wonderful speakers will make the music emitted from a mediocre record player sound wonderful! In the most ideal circumstance, you’ll have to prevent leaks in the music quality from occurring by keeping the overall performance of each and every component relatively well. If you need a recommendation of which record player to get, we suggest taking a look at one of the Audio Technica players, specifically the AT-LP 1240.

Read More